Meta Description: Follow our step-by-step guide to safely convert your gas cooktop to propane for flexible home cooking.
Whether you're outfitting an off-grid kitchen or simply switching fuel sources for energy savings, converting your gas cooktop to propane can be a smart and practical decision. With the right tools and components—many of which are already included in your cooktop—this process is easier than you might think.
In this guide, we’ll walk you through the key steps and considerations for a safe and effective gas-to-propane conversion.
Why Convert to Propane?
Propane (LPG) offers several benefits over natural gas:
-
Ideal for homes without direct gas lines
-
Portable and suited for RVs, cabins, or rural areas
-
Typically burns hotter and more efficiently
-
Often more cost-effective in the long run
Before beginning, make sure your gas cooktop supports dual fuel or LP conversion. All GASLAND gas cooktops are LPG-compatible and come with everything needed for the conversion.
What You’ll Need
To convert your natural gas cooktop to propane, you’ll typically require:
-
Propane conversion kit (included with all GASLAND cooktops)
-
Compatible gas orifices
-
A propane pressure regulator
-
Wrenches or pliers
-
Gas leak detector spray or soapy water
-
A licensed technician (required in most regions)
💡 Tip: The GASLAND Gas Pressure Regulator (1/2 PSI, LPG 10’’ WC & NG 5’’ WC) is suitable for all GASLAND gas cooktops and is already included with each unit.
Step-by-Step Conversion Instructions
Step 1: Turn Off the Gas Supply
Shut off the main gas valve and ensure the area is well-ventilated. Disconnect the existing natural gas line from your cooktop.
Step 2: Locate and Replace the Orifices
Remove the burners and access the orifices. Using a wrench, replace each NG orifice with its corresponding LPG orifice (included in your GASLAND kit). Be sure to match the correct size for each burner type.
Step 3: Adjust the Regulator
Switch the gas regulator from the NG setting to the LPG setting. On GASLAND regulators, this is typically done by flipping or rotating the cap to the marked LPG position.
If using a standalone regulator like this one, verify it is correctly rated for 1/2 PSI and propane use.
Step 4: Modify Air Shutters (if needed)
Some burners may require adjustment to their air shutters to maintain a proper blue flame with propane. Check your user manual for details.
Step 5: Reconnect and Test
Reconnect the gas line to a certified propane tank. Apply leak detection solution to all joints and test for bubbles while turning on the gas.
Step 6: Test Burner Performance
Ignite each burner and observe the flame. A clean, stable blue flame with minimal yellow tipping is ideal. Adjust air/fuel mixture as needed.
Do I Need a Professional?
Yes. In most regions, gas appliance modifications—including propane conversion—must be completed or certified by a licensed gas technician. This ensures proper setup, code compliance, and—most importantly—your safety.
If you're unsure, always consult local regulations before attempting any installation or conversion.
GASLAND Makes It Easy
Every GASLAND cooktop is designed with flexibility in mind. Whether you're installing a 30" 5 Burner Stainless Steel Cooktop or upgrading to a full-size 48" Professional Rangetop, you’ll find that:
-
All conversion components (orifices, regulator, instructions) are included
-
No extra kits are required
-
GASLAND units are optimized for both NG and LPG systems
Conclusion
Converting your gas cooktop to propane opens up new possibilities for flexible cooking—especially in off-grid or rural homes. With GASLAND’s all-in-one design and built-in compatibility, the process is straightforward, safe, and efficient when done properly.
Need help choosing the right size cooktop for your layout before converting? Start here:
👉 How Are Gas Cooktops Measured? A Guide to Choosing the Right Size
